FAQs Page
https://tbnation.net/pages/autoboat
https://tbnation.net/pages/autoboat
Currently, we do not have the option to sell the unit with a GPS installed in it.Product link:AUTOBOAT GPS PRO ANCHOR SYSTEM - FOR 12V MINN KOTA 30-55 LB TROLLING MOTORS OR SIMILAR
Yes, it's possible. Just make sure you have the GPS Sensor going the correct way.\. Product link:AUTOBOAT GPS PRO ANCHOR SYSTEM - FOR 12V MINN KOTA 30-55 LB TROLLING MOTORS OR SIMILAR
The following are the list of units that Autoboat will work with: MinnKota Endura C2 12V, MinnKota Endura MAX 12V, MinnKota Riptide Transom 12V (No Digital Maximizer), Newport Vessels NV Series 12V, Newport Vessels Kayak Series 12V, WaterSnake Tracer
Unfortunately, It will not, Motorguide is the one motor that will not work at all. Product link:AUTOBOAT GPS PRO ANCHOR SYSTEM - FOR 12V MINN KOTA 30-55 LB TROLLING MOTORS OR SIMILAR
The AutoBoat unit will not work with Endura Max. The Endura Max has a variable throttle and digital maximizer instead of the 1-5 forward and 1-3 reverse style throttle. The Max is not compatible with AutoBoat bc that throttle is the same style that i
They're compatible with any 12 V batteries. Product link:AUTOBOAT GPS PRO ANCHOR SYSTEM - FOR 12V MINN KOTA 30-55 LB TROLLING MOTORS OR SIMILAR
Yes, it will work with this motor, basically during the installation you will turn the shaft to speed 5 and keep it there. The rest of the controls will come from the AutoBoat unit. Product link:AUTOBOAT GPS PRO ANCHOR SYSTEM - FOR 12V MINN KOTA 30-5
The AutoBoat will not work with the Powerdrive, you will want to go with the ProNav system for that trolling motor. https://tbnation.net/products/pronav-motion-bundle-gps-trolling-motor-conversion-kit.
You can check it out and pre-order if you’d like here https://tbnation.net/products/autoboat-com-gps-marinizado-ancora.
We have not tried this on your specific motor or setup and don't have the parts to be able to, unfortunately. But from what it sounds like, they will not work on these at the moment. AutoBoat is coming out with a new design where this should work on
Here are some requirements the motor needs for the AutoBoat to work: 12v, Standard 5 forward and 3 reverse Throttle, Standard transom mount bracket with steering lock collar.
We recommend using a circuit breaker with your autoboat. Most of the trolling motors that work with this will only need a 50amp. https://tbnation.net/products/60-amp-circuit-breaker-for-trolling-motor"
We had one customer try it out and it didn't work. He needed about 1/2" more on the shaft for the AutoBoat to fit. We know he was using the same motor, but it was on a Nucanoe. We don't know much about kayaks so I'm not sure if that makes a differenc
Yes, as long as it doesn't have the digital maximizer. If it does have the digital maximizer, you will need to disassemble some wiring to by pass the maximizer for the AutoBoat to work which we will have a video on very soon.
Here is a link to the circuit breakers we recommend, 60amp. https://tbnation.net/products/60-amp-circuit-breaker-for-trolling-motor.